How to Thoroughly Clean Your Rescue Knife

How to Thoroughly Clean Your Rescue Knife

Rescue knives are an essential rescue tool that rescue personnel uses to cut through clothing and other materials to free trapped victims. Rescue personnel needs to know how to clean their rescue knife to function properly in a rescue situation. This blog post will teach you the steps of proper cleaning and care for your rescue knife.

To Disassemble a Knife or Not?

The first question is whether you should completely disassemble the knife or only clean the blade and take care of the pivot from the outside.

Here are some of my ideas on the subject. First, take the whole thing apart if you want to do a thorough cleaning or haven't cleaned the inside in a while. Then, depending on the knife, it won't take long and will restore your best rescue knife to its former glory.

You can skip the disassembly if you've recently cleaned the inside or merely feel the blade steels are dirty.

How To Clean The Blade of Survival Knife?

Cleaning a blade of a survival knife can be accomplished in a variety of ways. However, the majority of knife fans have their recipes or preferences.

I've recently been cleaning the blade with 91 percent rubbing alcohol because it's safe to use around food, does the job nicely, and evaporates rapidly.

I bought some cotton cloths, soaked them in alcohol, and wiped away the muck. I bought the clothes at a dollar store, but you may want to invest in some higher-quality clothes to prevent the white threads from rubbing on your knife.

It's as simple as that to clean the dirt and grime off the blade.

How To Clean The Pivot Without Disassembly?

If you choose not to disassemble the best survival knife to clean it, you should still clean the pivot, which is just as vital. A clean pivot will ensure that the knife opens and shuts smoothly and safely as it should.

You can do it in a few different ways. You can, for example, use compressed air to remove part of the dust.

However, knife lubricants and gun oil are the simplest ways to clear the pivot without disassembly. You apply it around the pivot and allow it to soak in. After that, as you open and close the knife, the lubrication cleans the pivot. It's also shockingly effective. I put it in a clumsy knife that wouldn't open properly. The grit was gone after a few uses of the knife, and the smoothness was restored.

How To Clean The Inside of The Survival Knife?

You must disassemble the survival knife if you want to be thorough. When disassembling the knife, remember to replace all of the pieces in the same order that they were removed. Do not, for example, reinstall a screw in a different spot or install a washer on the wrong side. While you're disassembling it, make sure everything is in order.

Once you're inside, you can begin to work. I soaked the cotton squares in rubbing alcohol and rubbed the scales well. To get into those tight locations, I also used a good ol' Q tip. If you want to, you can remove the scales on the other side.

Cleaning the washers is also crucial. It's enough to rub them with alcohol gently, but it's also important not to bend them. Other pivots, such as those with ball bearings, will require more effort to clean.

You can begin putting things back together once the inside has been completely cleaned. Add a little lubricant to the washers as you go to ensure a smooth opening.

It's obvious, but make certain that all of the pieces are returned to their proper places. Don't be shocked if it's not perfect when you reassemble it because you'll probably have to fiddle with the pivot tension to obtain the appropriate blade centering and action.

How To Clean The Handles?

Cleaning the handles of a knife can be done in a few different ways. To begin with, it is dependent on the material. Second, it is dependent on whether you are dismantling it. If you disassemble the knife, it'll be easier to clean and less prone to trap moisture between the liners and the scales (if the knife is built that way).

Warm water, dish soap, and a toothbrush are all you need to clean most materials, including Micarta, steel, and titanium. You can use this without disassembling the knife, but be careful not to use too much water and allow it to get into the knife.

Lastly, Make sure the handles and all the insides are thoroughly dry after cleaning. If you're looking for the best budget survival knife for outdoor or survival, we have it here at ApeSurvival! 

What is the Best Survival Pocket Knife Care Tips

You're holding your brand-new, gleaming survival knife. You're wowed by the design and high-quality materials used to create your masterpiece. So naturally, you understandably want to preserve your knife in excellent condition for as long as possible.

Even the best survival pocket knife or rescue knives in the world will eventually fail to do their function if not properly cared for. If you look after your knife, it will look after you when you need it the most. So how do you go about doing that? To get you started, here are some survival-knife care suggestions.

Correct Cleaning

Scrubbing your survival folding knife with soap and water is the finest way to clean it. However, it would help if you did so. Harsh chemicals and abrasive cleaning pads should be avoided because they might cause damage. Also, keep your knife out of the dishwasher. Because of the harsh cleaning agents and high temperatures, this is one of the most dangerous things you can do to your knife.

After washing your knife, make sure it is completely dry. This will keep rust at bay. Your knife is quite sharp.

If you don't touch the blade more than you have to, it will last longer. Acids in the skin's oils can corrode a knife's blade over time.

Routine Sharpening

If you want your knife to function well, it needs to be sharpened regularly. Not only will you lose utility if you don't, but a dull knife is always more dangerous. When you're removed from society, your greatest foe is an injury. Imagine stabbing yourself in the back of the head with a dull knife in the middle of nowhere. A survivalist's worst dread comes true.

To avoid such mishaps, maintain your knife sharp at all times. There are two ways to accomplish this. You can either sharpen the knife yourself or engage a professional to do it. If you're not familiar with knife sharpening, it's a good idea to hire an expert.

Avoid Misuse

Survival knives became popular when US pilots used them if they were shot down in enemy territory. The knife was there to aid with constructing a shelter, acquiring food, and self-defense in an emergency. However, there were more common instruments to utilize when opening cans, prying and needing an impromptu screwdriver when back on base. These knives are strong and sturdy, with a serrated blade (typically partially serrated), blunt tip, glass breaker, seat belt cutter or cord cutter, and single-handed opening support.

Your survival knife may save your life or allow you to spend more time in the wilderness more controllable. The easiest method to preserve your survival knife in top shape is only to use it when necessary and to find other tools to utilize for everyday activities around the house.

You may also like